| Product model | HRP-67-SV | ||||
| Structure describing | Table size(mm) | ∅45 | |||
| Transmission ratio | 5:1 | ||||
| The transmission way | Helical gear | ||||
| The adjusting range is ° | 360° | ||||
| The bearing form | Deep groove ball bearing + thrust ball bearing | ||||
| Main material - surface treatment | aluminum alloy anodic oxidation were black | ||||
| Accuracy of description | The resolution of the(sec) | ≤5 | |||
| Repeated positioning accuracy(min) | ≤1 | ||||
| alignment μm | 15 | ||||
| Table parallelism μm | 20 | ||||
| bear the weight of | The thrust load(KG) | 20 | |||
| Inertial load(N.m) | 5 | ||||
| self-respect | (without electric motor)kg | 0.65 | |||
| Rated torque (N.m) | 0.64/1.28 | ||||
| Precision life (h) | 20000hrs | ||||
| Allowed speed (RPM) | 200 | ||||
| The motor type | 50W servo 100W servo | ||||
| The hollow hole | ∅28mm | ||||
| Type of installation | vertical | ||||
| Protection grade | IP40 | ||||
| PS: peripheral units:1rpm=360°.1°=60′(arcmin).1′=60″(arcsec) | |||||
| Rounded corner error conversion arc length error: calculating diameter x 3.1415 present (360 ° x 60 'x 60 ") x back gap value | |||||
The last one：Roller cross shaft ring RPS-12024 [Rotate the platform slightly]
The next one：Deep groove ball bearing + thrust ball bearing HRP-67-ST [Hollow rotating
